Description
The world’s most advanced ceramic technology
DuraSlic DS 1500 is a revolutionary permanent ceramic nano coating based on the world’s most advanced ceramic technology. DS 1500 offers a high level of hydrophobicity, gloss, abrasion resistance and UV protection in a robust long lasting coating. It can be applied to painted, coated and base metal surfaces, glass and plastics, to impart an unprecedented level of protection from water, chemicals, UV and corrosion. Furthermore, DS 1500 is a multi-layerable formula that enables the user to boost the level of protection as needed. DS 1500 can be top coated with DuraSlic SpeedCoat to achieve still higher levels of hydrophobicity and protection.
Easiest-to-apply
Outstanding Hydrophobic and Oleophobic Properties “Easy-to-Clean” and Repels Most Materials Molecular Bond to Painted or Metallic Surfaces High Film Hardness 5-year Scrub Test Performance Easiest-to-apply of all ceramic coatings Clear, Glossy finish Environmentally Friendly Formula
CURING DuraSlic will dry to tack free in 20-30 minutes. Do not disturb the coating or re-coat during this time. The coating begins to cure as soon as solvents begin to evaporate. The coating will reach 7H hardness after 18 hours and will fully cure to 10H hardness in 3 days at room temperature. Rain-ready in 24 hours.
Ceramic coating based on revolutionary NanoSlic technology
DuraSlic Panel Prep and Glass Wipe. If the paint has been exposed to exterior conditions, further treatment may be necessary before these same steps. Metal surfaces will require the same cleaning steps. TEST RESULTS Physical Properties | Values Appearance | Clear High Gloss Specific Gravity @ 23°C | 1.02 a/cm Viscosity @ 23°C | 3-5 cP Nonvolatile content 10-12% Static contact angle, water, ASTM D7490 | 105° Static contact angle, n-hexadecane 63° Dry Time | 20-30 minutes tack free Film Thickness 200 nm Pencil Hardness | 10H (Mitsubishi) ENVIRONMENTAL DuraSlic coating solvents are classified as not VOCs, eco friendly and ECNA, REACH, RoHS and RoHS II compliant. DuraSlic doesn’t use Perfluorooctanoic acid (PFOA).
DS 1500 is a hand-applied ceramic coating based on revolutionary NanoSlic technology. The coating chemically bonds to the surface while forming a hydrophobic and oleophobic nanolayer to protect paint and enhance gloss. DuraSlic has a robust, abrasion resistant surface that stands up to repeated cleaning. PRE-CLEAN The paint or metal surface should be completely clean of foreign materials. Painted surfaces should be cleaned to the level required for a superior paint application. If the car is new, and not exposed to exterior conditions, clean with a no-residue detergent, rinse, dry and then wipe with