DuraSlic 1500 Xtreme Ceramic Nano Coating

Category:

$225.00 VAT .inc

A black and white logo for durashield vehicle protection.

Description

1500 Xtreme is the world’s first wipe-on ceramic coating

 

DuraSlic DS 1500 Xtreme is a revolutionary permanent ceramic nano coating based on the world’s most advanced ceramic technology. DS 1500 Xtreme is the world’s first wipe-on ceramic coating that offers a high level of both hydrophobicity and oleophobicity. It can be applied to painted, coated and base metal surfaces, glass and plastics, to impart an unprecedented level of protection from water, chemicals, UV and corrosion.

 

10 year Ceramic Coating

•Outstanding Hydrophobic and Oleophobic Properties

“Easy-to-Clean” and Repels Most Materials

Molecular Bond to Painted or Metallic Surfaces.

High Film Hardness

10-year Scrub Test Performance

Easiest-to-apply of all ceramic coatings

Clear, Glossy finish

Environmentally Friendly Formula

 

 Ceramic coating that is both hydrophobic and oleophobic

 

DuraSlic is a ceramic coating that is both hydrophobic and oleophobic. DuraSlic integrates three functional layers that form upon application. At the substrate interface, DuraSlic has a nanometer thick layer that chemically binds to the substrate. Above that is a ceramic layer that adds hardness, chemical resistance, corrosion, and scratch resistance. The top surface imparts hydrophobicity, oleophobicity, and chemical resistance. DuraSlic can be defined as a “hybrid” coating, combining the benefits of a ceramic coating and a nano coating.

 

DuraSlic’s unique hybrid structure works in 3 ways:

  • Forms a dense network of strong chemical bonds to the substrate
  • Forms an inert, high-performance binder polymer layer
  • Forms a highly hydrophobic and oleophobic contact surface

 

DuraSlic’s unique structure and chemical composition prevent normal degradation when applied to many surfaces. This means greater efficiency, reduced maintenance, longer life and ultimately significant cost savings. DuraSlic not only adds physical protection to surfaces but also contributes to a cleaner cosmetic appearance.

DuraSlic is largely composed of silica, structured with silica bonds. As such, DuraSlic materials are inherently capable of maintaining properties at temperatures well beyond non -ceramic polymers.

1500 Xtreme Ceramic Coating is resistant to most solvents

DuraSlic coatings are resistant to most solvents and will be unaffected by a wide range in pH. Because 10H hardness is achieved in most DuraSlic formulations, significant scratch resistance is improved.

Low surface energy and ceramic structure make DuraSlic a unique nanocoating. DuraSlic is a revolutionary coating technology that offers many of the benefits of “advanced ceramics.” DuraSlic can be applied to a wide variety of surfaces. The required thickness of the coating will depend on the application and the desired result. DuraSlic protects and enhances surfaces of metals, glass, polymers and coatings and many plastics. It is scratch resistant and creates a surface that is easy to clean.

 

PRE-CLEAN

The paint or metal surface should be completely clean of foreign materials. Painted surfaces should be cleaned to the level required for a superior paint application. If new, and not exposed to exterior conditions, clean with a no-residue detergent, rinse, dry and then wipe with DuraSlic Panel Prep and Glass Wipe. If the paint has been exposed to exterior conditions, further treatment may be necessary before these same steps. Metal surfaces will require the same cleaning steps.

 

APPLICATION

Clean

  1. Wash as thoroughly as possible to remove all contaminants. Dry but do not use any additional chemicals to assist drying.
  2. Do not coat in direct sunlight.
  3. Preparation of the surface before application is the key to the perfect result. You want the surface as clean as possible.
  4. Complete cleaning by using Panel Prep and Glass Wipe to remove any remaining contaminants.

Apply Drops on Applicator

Put on a pair of rubber gloves to avoid any coating contacting your skin. During use, the applicator will become sticky.

  1. Pour several drops of DS 1500 Xtreme onto a microfiber applicator. Immediately secure the cap back onto the bottle to avoid premature curing of the product inside of the bottle.

Work Chemical into The Paint

  1. Wipe the applicator onto the paint (or bare metal) in approximately of a maximum 2 × 2-foot area or less, in up-down or left-right movements, using even pressure across the surface. Make sure the coating fully covers the area. You may need to wipe back and forth as in a crosshatch pattern to level the coating properly.
  2. After 2-4 minutes, coating will have a rainbow effect in appearance.

Buff After Rainbow Appears

  1. After the rainbow appears, use a clean soft microfiber towel to wipe away all residue.

 

Warning – Do not allow coating to dry on any painted surfaces!

For best results do not expose the paint to any moisture for 24 hours.

Discard the microfiber applicator. It is a single-use item that will harden as it dries when used with DS 1500 Xtreme. Also discard the towel used to wipe off the excess coating.

 

CURING

DuraSlic will dry to tack free in 20-30 minutes. Do not disturb the coating or re-coat during this time. The coating begins to cure as soon as solvents begin to evaporate. The coating will reach 7H hardness after 18 hours and will fully cure to 10H hardness in 3 days at room temperature. Rain-ready in 24 hours.

 

TEST RESULTS

Property | Test/Specification | Result

Contact Angle, water | ASTM D7490 | 105°

Contact Angle, п-hexadecane | ASTM D7490 | 63°

Pencil Hardness | ASTM D3363 |10H Mitsubishi 10H Pencil

Roll-Off Angle | Glass Substrate | 20°

Adhesion, Cross Hatch | ASTM D3359 | 5B (no loss)

UV Resistance | QUV, AST G154 16, 500 hours | Pass

Salt Fog Resistance | AST B117-18, 500 hours | Pass

Refractive Index | | 1.4

Water Vapor Permeability | | 0.02 g/100 sq. in./day

pH Resistance | pH 2-12, 4 hours @ 72°F/23°C | No Change

Solvent Resistance | All Common Solvents 24 hours/72°F/23°C | No attack

Flexibility | Mandrel Bend, ASTM D522-17, Method A | Pass, (No loss, cracking)

Electrical Resistivity | IPC-CC-830 | 6.9 X10^6 Megohms

Dielectric Constant (Volts/Mil) | IPC-CC-830 | 12,000 Volts/mil

Film Thickness | | 200 nm/layer

 

ENVIRONMENTAL

DuraSlic coating solvents are classified as not VOCs,  eco friendly and ECNA, REACH, RoHS and RoHS II compliant. DuraSlic doesn’t use Perfluorooctanoic acid (PFOA).

Brand

DURASLIC

The research team behind DuraSlic hybrid ceramic coating technology is based at the NanoSlic Innovation Center in Cincinnati, Ohio, USA.
A black and white logo for durashield vehicle protection.